Licensed Electricians · Chicago Southwest Suburbs
Recessed & Accent Lighting
Good lighting is mostly layout. Spacing, beam angle, colour temperature and dimmer compatibility decide whether a room feels designed or feels like a parking garage — and none of that is fixable after the holes are cut.
We plan the layout before anything gets cut: how many cans, where they sit relative to walls and furniture, and what colour temperature suits the room. 2700K reads warm and residential; 3000K is crisper and tends to suit kitchens and baths. Mixing them across an open floor plan is the single most common mistake we get called in to correct.
Retrofits in finished ceilings are most of what we do, and they don't require tearing the room apart. We cut clean, fish the runs, and patch is usually limited to the fixture openings themselves.
Every job is permitted and inspected where the village requires it, and we leave the work clean. If you'd rather talk it through first, call (708) 407-3559 — quotes are free.
What we install
- Recessed cans and slim-profile wafer lights, new build or retrofit
- Cove, tray, and indirect ceiling lighting
- Under-cabinet and toe-kick lighting in kitchens
- Stair, step, and hallway accent lighting
- Exterior soffit, landscape, and security lighting
- Chandeliers, pendants, and heavy fixture mounting with proper support
- Dimmers matched to the fixture so nothing flickers or buzzes
Why LED dimming goes wrong
- Legacy incandescent dimmers paired with LED loads — the usual culprit
- Mixed fixture brands on one dimmer, each with a different driver
- Dimmers loaded below their minimum rated wattage
- No neutral at the switch box, limiting which dimmers will work
- Trailing-edge vs leading-edge mismatch with the LED driver
Common questions
How many recessed lights does a room need?
A common starting point is spacing cans at roughly half the ceiling height apart, then adjusting for the furniture layout and any accent lighting. We lay it out on site before cutting anything.
Can you add recessed lighting to a finished ceiling?
Yes — that's the majority of what we do. Wafer-style fixtures fit shallow cavities and we fish the wiring, so patching is usually limited to the openings themselves.
What colour temperature should I choose?
2700K for living spaces and bedrooms, 3000K for kitchens and bathrooms. Many fixtures are field-selectable now, so you can decide once they're in and see them lit.
Why do my LEDs flicker?
Almost always a dimmer that isn't rated for the LED load, or mixed fixture types sharing one dimmer. It's usually a straightforward fix.
Get a free quote
Serving Tinley Park, Orland Park, Mokena, Frankfort and the surrounding southwest suburbs. Call (708) 407-3559 or email sparkntechllc@gmail.com.